Originaldatei (4.599 × 3.066 Pixel, Dateigröße: 4,31 MB, MIME-Typ: image/jpeg)
Diese Datei stammt aus Wikimedia Commons und kann von anderen Projekten verwendet werden. Die Beschreibung von deren Dateibeschreibungsseite wird unten angezeigt.
BeschreibungRadio testing of BepiColombo orbiter ESA353568.jpg |
English: If ESA’s Mercury orbiter of the BepiColombo mission seems to stand at an unusual angle above its test chamber floor, that’s because it does – intentionally so.
The orbiter underwent ‘electromagnetic compatibility, radiated emission and susceptibility’ testing last month inside the Maxwell chamber ofESA’s ESTEC Test Centrein Noordwijk, the Netherlands. Maxwell’s shielded metal walls and doors form a ‘Faraday cage’ to block unwanted external electromagnetic radiation, while its internal walls are cover with ‘anechoic’ radio-absorbing foam pyramids to mimic boundless space. “We are performing two types of compatibility testing,” explained Marco Gaido, assembly, integration and test manager for BepiColombo. “First, we are checking the craft is electrically compatible with the electrical field generated by the Ariane 5 launcher that will deliver it into orbit, with no possibility of interference with BepiColombo’s receivers. “Secondly, we are testing if there is any risk of incompatibility between the different subsystems of the spacecraft itself when it orbits Mercury. In particular, we want to check that its trio of antennas on top can communicate properly with Earth. “Accordingly, it was deliberately oriented to simulate a worst-case scenario for test purposes.” The orbiter was positioned to allow deployment of its medium-gain antenna in terrestrial gravity. The high-gain antenna reflector meanwhile was deployed in a worst-case position, supported by a dedicated fixture. The spacecraft was tilted by means of a large platform while the high-gain antenna was supported by a tower made of wood, transparent to radio waves. All test cables used were shielded to reduce potential interference. ESA’s Mercury Planetary Orbiter will be launched to Mercury together with Japan’s Mercury Magnetospheric Orbiter aboard an ESA-built carrier spacecraft, the Mercury Transfer Module. This entire three-moduleBepiColombostack will undergo similar testing at ESTEC. |
Datum | |
Quelle | http://www.esa.int/spaceinimages/Images/2016/01/Radio_testing_of_BepiColombo_orbiter |
Urheber | European Space Agency |
Genehmigung (Weiternutzung dieser Datei) |
ESA–G. Porter,CC BY-SA 3.0 IGO |
Title InfoField | Radio testing of BepiColombo orbiter |
Set InfoField | Technology image of the week |
Klicke auf einen Zeitpunkt, um diese Version zu laden.
Version vom | Vorschaubild | Maße | Benutzer | Kommentar | |
---|---|---|---|---|---|
aktuell | 09:26, 24. Mai 2017 | 4.599 × 3.066 (4,31 MB) | wikimediacommons>Fæ | European Space Agency, Id 353568, http://www.esa.int/spaceinimages/Images/2016/01/Radio_testing_of_BepiColombo_orbiter, User:Fæ/Project_list/ESA |
Die folgende Seite verwendet diese Datei:
Diese Datei enthält weitere Informationen, die in der Regel von der Digitalkamera oder dem verwendeten Scanner stammen. Durch nachträgliche Bearbeitung der Originaldatei können einige Details verändert worden sein.
Hersteller | NIKON CORPORATION |
---|---|
Modell | NIKON D4 |
Fotograf | Anneke Le Floc'h |
Urheberrechte |
|
Belichtungsdauer | 1/1.000 Sekunden (0,001) |
Blende | f/2,8 |
Film- oder Sensorempfindlichkeit (ISO) | 8.000 |
Erfassungszeitpunkt | 10:10, 3. Dez. 2015 |
Brennweite | 24 mm |
height | 3.066 |
width | 4.599 |
Horizontale Auflösung | 300 dpi |
Vertikale Auflösung | 300 dpi |
Software | Adobe Photoshop Camera Raw 8.8 (Macintosh) |
Speicherzeitpunkt | 18:31, 3. Dez. 2015 |
Belichtungsprogramm | Zeitautomatik |
Exif-Version | 2.3 |
Digitalisierungszeitpunkt | 10:10, 3. Dez. 2015 |
APEX-Belichtungszeitwert | 9,965784 |
APEX-Blendenwert | 2,970854 |
Belichtungsvorgabe | 0 |
Größte Blende | 3 APEX (f/2,83) |
Messverfahren | Mittenzentriert |
Lichtquelle | Unbekannt |
Blitz | kein Blitz |
Erfassungszeitpunkt (1/100 s) | 10 |
Digitalisierungszeitpunkt (1/100 s) | 10 |
Sensorauflösung horizontal | 1.368,888885498 |
Sensorauflösung vertikal | 1.368,888885498 |
Einheit der Sensorauflösung | 3 |
Messmethode | Ein-Chip-Farbsensor |
Quelle der Datei | Digitale Standbildkamera |
Szenentyp | Normal |
Benutzerdefinierte Bildverarbeitung | Standard |
Belichtungsmodus | Automatische Belichtung |
Weißabgleich | Automatisch |
Digitalzoom | 1 |
Brennweite (Kleinbildäquivalent) | 24 mm |
Aufnahmeart | Standard |
Verstärkung | High gain up |
Kontrast | Normal |
Sättigung | Normal |
Schärfe | Normal |
Motiventfernung | Unbekannt |
Seriennummer der Kamera | 2034429 |
Verwendetes Objektiv | 24.0-70.0 mm f/2.8 |
Datum zu dem die Metadaten letztmalig geändert wurden | 19:31, 3. Dez. 2015 |
Eindeutige Kennung des ursprünglichen Dokuments | D44AE53897FCA71CBDEA63773E68ACC8 |
IIM-Version | 4 |